Auflistung nach Schlagwort "Cost effectiveness"

Sortiert nach: Sortierung: Ergebnisse:

  • Additive manufacturing of patient-specific tubular continuum manipulators 
    Amanov, E.; Nguyen, T.-D.; Burgner-Kahrs, Jessica (Bellingham, WA : S P I E - International Society for Optical Engineering, 2015)
    Tubular continuum robots, which are composed of multiple concentric, precurved, elastic tubes, provide more dexterity than traditional surgical instruments at the same diameter. The tubes can be precurved such that the ...
  • Advanced high pressure turbine blade repair technologies 
    Alfred, Irene; Nicolaus, Martin; Hermsdorf, Jörg; Kaierle, Stefan; Möhwald, Kai; Maier, Hans Jürgen; Wesling, Volker (Amsterdam : Elsevier B.V., 2018)
    Components in aircraft engines and gas turbines are exposed to extreme conditions in order to increase performance and efficiency of the overall engine, hence there is an increasing need for cost-effective and time-efficient ...
  • Carrier-envelope offset frequency stabilization of a thin-disk laser oscillator via depletion modulation 
    Andrade, José R.C.; Modsching, Norbert; Tajalli, Ayhan; Dietrich, Christian M.; Kleinert, Sven; Placzek, Fabian; Kreipe, Bernhard; Schilt, Stephane; Wittwer, Valentin J.; Südmeyer, Thomas; Morgner, Uwe (Piscataway : Institute of Electrical and Electronics Engineers, 2020)
    We present a novel concept for the stabilization of the carrier-envelope offset (CEO) frequency of femtosecond pulse trains from thin-disk laser oscillators by exploiting gain depletion modulation in the active gain region. ...
  • Classification of landslide activity on a regional scale using persistent scatterer interferometry at the Moselle Valley (Germany) 
    Kalia, Andre Cahyadi (Basel : MDPI AG, 2018)
    Landslides are a major natural hazard which can cause significant damage, economic loss, and loss of life. Between the years of 2004 and 2016, 55,997 fatalities caused by landslides were reported worldwide. Up-to-date, ...
  • Cost effectiveness of exemestane versus tamoxifen in post-menopausal women with early breast cancer in Germany 
    Braun, Sebastian; Mittendorf, Thomas; Menschik, Thomas; Greiner, Wolfgang; Schulenburg, Johann-Matthias Graf von der (Basel : S. Karger AG, 2009)
    Background: Medical studies have shown that switching to exemestane after 2-3 years of adjuvant treatment with tamoxifen is effective when looking at overall survival. No cost effectiveness study of exemestane has been ...
  • Cost-effectiveness of primarily human papillomavirus-based cervical cancer screening in settings with currently established Pap screening: A systematic review commissioned by the German Federal Ministry of Health 
    Mühlberger, Nikolai; Sroczynski, Gaby; Esteban, Eva; Mittendorf, Thomas; Miksad, Rebecca A.; Siebert, Uwe (Cambridge : Cambridge University Press, 2008)
    Objectives: The aim of this study was to summarize the current evidence for the cost-effectiveness of primarily human papillomavirus (HPV) -based cervical cancer screening in settings with already established Papanicolaou ...
  • Enabling an Industrial Robot for Metal Cutting Operations 
    Denkena, Berend; Lepper, Thomas (Amsterdam : Elsevier, 2015)
    This paper focuses on a cost-effective manufacturing of large frame parts for aerospace industries with an industrial robot. The main challenge is the low stiffness of a serial kinematic, resulting in positioning errors ...
  • Manufacturing and characterization of asymmetric evanescent field polished couplers for grating assisted mode selective fiber coupling 
    Schlangen, Sebastian; Bremer, Kort; Zheng, Yulong; Isaak, Andreas; Wurz, Marc Christopher; Böhm, Sebastian; Wellmann, Felix; Steinke, Michael; Pelegrina Bonilla, Gabriel; Neumann, Jörg; Kracht, Dietmar; Roth, Bernhard; Overmeyer, Ludger (Bellingham, Wash. : SPIE, 2018)
    Mode division multiplexing (MDM) could bring a technological progress in the field of optical telecommunication by increasing the data transmission bandwidth. A key challenge for enabling MDM lies in manufacturing of ...
  • Material Removal Mechanisms in Grinding of Mixed Oxide Ceramics 
    Denkena, Berend; Busemann, Sarah; Gottwik, Lukas; Grove, Thilo; Wippermann, Andi (Amsterdam : Elsevier BV, 2017)
    The technological basis for a cost-effective and reliable grinding process of mixed oxide ceramics requires a fundamental understanding of the prevailing grinding mechanisms to maintain surface quality and strength ...
  • A portable biosensor for 2,4-dinitrotoluene vapors 
    Prante, Marc; Ude, Christian; Große, Miriam; Raddatz, Lukas; Krings, Ulrich; John, Gernot; Belkin, Shimshon; Scheper, Thomas (Basel : MDPI AG, 2018)
    Buried explosive material, e.g., landmines, represent a severe issue for human safety all over the world. Most explosives consist of environmentally hazardous chemicals like 2,4,6-trinitrotoluene (TNT), carcinogenic ...
  • Printing polymer optical waveguides on conditioned transparent flexible foils by using the aerosol jet technology 
    Reitberger, Thomas; Hoffmann, Gerd-Albert; Wolfer, Tim; Overmeyer, Ludger; Franke, Jörg (Bellingham, Wash. : SPIE, 2016)
    The optical data transfer is considered as the future of signal transfer due to its various advantages compared to conventional copper-based technologies. The Aerosol Jet Printing (AJP) technology offers the opportunity ...
  • Rational design of molecularly imprinted polymers using quaternary ammonium cations for glyphosate detection 
    Zarejousheghani, Mashaalah; Jaafar, Alaa; Wollmerstaedt, Hendrik; Rahimi, Parvaneh; Borsdorf, Heiko; Zimmermann, Stefan; Joseph, Yvonne (Basel : MDPI AG, 2021)
    Molecularly imprinted polymers have emerged as cost-effective and rugged artificial selective sorbents for combination with different sensors. In this study, quaternary ammonium cations, as functional monomers, were ...
  • Solar thermal component activation 
    Hachul, Helmut; Ridder, Daniela; Tekinbas, Yesim; Giovannetti, Federico; Weiland, Finn; Kirchner, Maik (Bristol : IOP Publ., 2021)
    Wall and roof components made of steel sandwich elements are firmly established in industrial and commercial construction. They are cost-effective and characterized by excellent physical properties. Here, hybrid approaches ...
  • Temperature-dependence of polymer grating couplers for single-mode waveguides 
    Li, Pei; Sherman, Stanislav; Rezem, Maher; Honnef, Kirsten; Zappe, Hans (Bellingham, WA : SPIE - International Society for Optical Engineering, 2018)
    Polymer optical sensors have attracted significant scientific interest due to the advantages of flexibility and low-cost mass-production possibilities. A main challenge in integration of all-polymer systems is interfacing ...
  • Towards fabrication and application of polymer based photonics networks and sensors 
    Rahlves, Maik; Rezem, Maher; Günther, Axel; Kelb, Christian; Khan, Muhammad; Reithmeier, Eduard; Roth, Bernhard (Bellingham, Wash. : SPIE, 2018)
    Highly-functional photonic sensor networks integrated in thin polymer foils offer great potential for versatile applications in the life sciences, medicine, environmental analytics or production technology. For their ...